MECHANICAL

TENSILE TESTING

We have 600 KN and 30 KN tensile machines, which provide Tensile Strength (UTS), Yield Strength (Z), Reduction of Area and Elongation Values for Room and Elevated (600 KN only) Temperature Tensiles. Both machines have the capacity to work with a wide range of sample sizes, which we can machine from even the smallest sample which may come from the following: Plates, Flanges, Tubes, Pipes, Castings, Forgings etc.
We are accredited to carry out Elevated Tensiles from 100°c to 500°c (Forces 2kN to 600kN) to ATSM E21-09 and BS EN ISO 6892-2 : 2011 Standards.
We can carry out (Z testing) Through Thickness Tests from 25mm thick, without welding studs to samples.

Both our machines have been calibrated by a UKAS accredited body and testing is carried out to the latest BS EN ISO and ASTM standards in our UKAS accredited testing laboratory, number 8774, working to our BS EN ISO/IEC 17025 accreditation.
For further information on our Mechanical Testing Services, please do not hesitate to contact us on the details below:
Telephone 01207 230621or you can email our Test House Technical Manager, Matthew Williamson on matthewilliamson@conmecheng.com who will be happy to assist.

Mechanical Microstructure Testing

Con Mech Engineers Test House offers a Metallography Service on the following:

  • Sample cutting and preparation to a polished finish
    Chemical / Electrochemical etching
  • Examination of metallic microstructures
  • Image analysis and digital photography

Assessments to ASTM E112 (determining average grain size) and ASTM E562 (determining volume fraction by systematic manual point count).

Assessments to ASTM E112 (determining average grain size) and ASTM E562 (determining volume fraction by systematic manual point count).
The above testing is covered to the latest ASTM standards in our UKAS accredited testing laboratory, number 8774, working to our BS EN ISO/IEC 17025 accreditation.
For further information on our Mechanical Testing Services, please do not hesitate to contact us on the details below:
Telephone 01207 230621or you can email our Test House Technical Manager, Matthew Williamson on matthewilliamson@conmecheng.com who will be happy to assist.

Mechanical Hardness Testing

Con Mech Engineers Limited Test House covers the following scales – Brinell HBW10/3000, Rockwell HRC and HRB , Vickers Hv10 and Hv30 Loads.
All the above mentioned are tested to the latest BS EN ISO and ASTM standards in our UKAS accredited testing laboratory, number 8774, working to our BS EN ISO/IEC 17025 accreditation
For further information on our Mechanical Testing services, please do not hesitate to contact us on the details below:
Telephone 01207 230621or you can email our Test House Technical Manager, Matthew Williamson on matthewilliamson@conmecheng.com who will be happy to assist.

Mechanical Corrosion Testing

Con Mech Engineers Limited Test House Corrosion Testing is carried out in accordance to ASTM G48 Method A (Ferric Chloride Pitting Test), ASTM A923 Method C (Ferric Chloride Corrosion Test for classification of structures of duplex stainless steels) and ASTM A262 Practise E (Detecting Susceptibility to Intergranular attack in austenitic stainless steels).
All the above testing is carried out to the latest ASTM standards in our UKAS accredited testing laboratory, number 8774, working to our BS EN ISO/IEC 17025 accreditation.
For further information on our Mechanical Testing Services, please do not hesitate to contact us on the details below:
Telephone 01207 230621or you can email our Test House Technical Manager, Matthew Williamson on matthewilliamson@conmecheng.com who will be happy to assist.

Mechanical Chemical Analysis (O.E.S) Testing

Con Mech Engineers Limited Test House Chemical Analysis is performed using our Optical Emission Spectrometer (OES). Chemical analysis can be carried out on low carbon, duplex and stainless steels.
Our OES unit covers low carbon up to 19 different elements and 17 elements on duplex and stainless steel, which accommodates the majority of the General Specifications.
All Chemical Analysis performed are covered by our internal procedures and in our UKAS accredited testing laboratory number 8774, working to our BS EN ISO/IEC 17025 accreditation.
For further information on our Mechanical Testing services, please do not hesitate to contact us on the details below:
Telephone 01207 230621or you can email our Test House Technical Manager, Matthew Williamson on matthewilliamson@conmecheng.com who will be happy to assist.

Mechanical Charpy Impact Testing

Con Mech Engineers Limited Test House has Charpy Impact Testing machines with a working range of 300 Joules for BS EN ISO Standards and 406.7 Joules for ASTM Standards.
Testing is carried out from ambient to -102°C and -196°C, on the following materials: Carbon, Duplex, Stainless Steel in our UKAS accredited testing laboratory number 8774, working to BS EN ISO and ASTM standards in line with our BS EN ISO/IEC 17025 accreditation.
For further information on our Mechanical Testing Services, please do not hesitate to contact us on the contact details below:
Telephone 01207 230621or you can email our Test House Technical Manager, Matthew Williamson on matthewilliamson@conmecheng.com who will be happy to assist.

fr_FR
Retour en haut
Retour haut de page

Gagner du temps. Demander un rappel maintenant

We can help you find the product you're looking for

Save Time. Request a Call Back Now